Invisible blind spots
Teams lack the information to find the root cause of communication problems and fix them efficiently.
Catalog / Network & RF management / MCM suite
MCM · Mobile Coverage MapperFeatured
Measure wireless coverage where other tools can't reach.
MCM measures, analyzes and optimizes the coverage of existing industrial wireless networks, without modifying infrastructure or adding staff. It brings mesh, point-to-multipoint, Wi-Fi and LTE/5G networks and the RF spectrum together on one georeferenced map.
6+ RF technologies240 MHz to 6.1 GHz spectrum1 Hz GPS on every sample4 modules
The problem
Industrial networks move. So do their problems.
01
02
Discontinuous measurement
Manual surveys are occasional and have no history. Every drive test is an isolated event.
03
Multi-vendor without integration
Several wireless technologies share the same site, and no tool correlates them on one map.
04
Decisions without data
Infrastructure planning relies on intuition instead of measured coverage, causing extra cost and rework.
The result: troubleshooting cycles that take days, repeated failures and fleets stopped by network problems that could have been detected earlier.
The MCM ecosystem
Measure, analyze and optimize, without touching the network.
Diagnose interference
Real-time spectrum sweeps from 240 MHz to 6.1 GHz identify noise and co-channel interference, correlate them with RSSI and SNR degradation, and locate the exact point on the route.
Measure every technology
Wi-Fi 2.4/5 GHz, non-Wi-Fi 5 GHz systems and LTE/5G on the same journey: RSSI, SNR, MCS, throughput, latency and blackout detection, with GPS heatmaps per variable.
Capture data in the field
A probe on work vehicles measures continuously on every operating trip. GPS, RF signal and throughput are recorded without intervention.
Modules
Four products for every context of use.
SW-MC01 · Software
MCM Compact
Standalone Windows app that maps mesh, PtMP, Wi-Fi and LTE coverage with GPS, blackouts and throughput tests.
In production
HW-RF01 · Hardware
MCM OFA
IP67 indoor and outdoor probe that logs RSRP, RSRQ, SINR, Wi-Fi and spectrum with GPS, 24/7 from vehicles.
In development
SW-MC02 · Software
MCM Center
Enterprise platform for multi-vehicle heatmaps, automatic fault diagnosis, RF planning and SLA reports.
In development
SW-MC03 · Software
MCM Scout
Technician tool for manual coverage audits where vehicles cannot go: indoors, walkways and heights.
Planned
Compare
What each module does.
| Capability | Compact Windows | Scout Field PC | OFA Vehicle probe | Center Enterprise |
|---|---|---|---|---|
| Connectivity measurement (SNMP, ICMP, throughput tests) | ✓ | ✓ | ✓ | ✓ |
| Handover and blackout detection | ✓ | ✓ | ✓ | ✓ |
| LTE / 5G NR radio metrics | — | — | ✓ | — |
| Passive Wi-Fi scan | — | — | ✓ | — |
| RF spectrum 240 MHz to 6.1 GHz | — | — | ✓ | ✓ |
| Vibration and road roughness | — | — | ✓ | ✓ |
| Live map, dashboards and replay | ✓ | — | — | ✓ |
| Automatic diagnosis and area comparison | — | — | — | ✓ |
| RF link planning and simulation | — | — | — | ✓ |
| Site inventory, alarms and SLA | — | — | — | ✓ |
| Reports PDF, DOCX, XLSX, KMZ | ✓ | — | — | ✓ |
✓ available · — not included
In the field
From raw samples to decisions.
Value chain
Six processes where MCM adds value.
01
Plan
Design and relocate RF infrastructure with link budgets, line of sight and coverage simulation calibrated with field data.
02
Deploy
Plan drive tests by route, survey areas without vehicle access, and validate installations before and after.
03
Operate
Monitor fleet and network 24/7 without an operator, with up/down/degraded status and alerts.
04
Diagnose
Separate vehicle, zone and interference causes automatically, and rank the worst vehicles and areas.
05
Manage spectrum
Validate the channels in use and detect signals in unauthorized channels.
06
Decide
Availability, SLA compliance and correlation with fleet systems in management reports.
Closed loop: field measurements calibrate the simulation model, and every OFA journey validates it again, so each investment decision is more precise than the last.
Why MCM
What no other single tool offers.
One platform
Mesh, point-to-multipoint, Wi-Fi and LTE/5G on one unified map.
100% georeferenced
Every sample carries its GPS position. No manual correlation.
Field evidence
Real network, real operating conditions, not simulations.
Autonomous
MCM OFA measures the whole fleet continuously.
Scalable
Compact for a pilot, Center and OFA for the full operation.
Built with operators
Designed and validated with active mining operations.
Licensing
Modular, growing with the operation.
Start with one technology and one measuring device. Add technologies, more simultaneous devices, geofencing and custom terrain simulation as the operation grows. Pricing and packages are provided through ITTC's vertical partners.
Sales model
100% B2B. ITTC products are supplied through specialized partner companies in each vertical. Contact us to find the partner for your sector, or to become one.
Contact sales